The floor is DONE!! And it feels so good! Every conversion process we’ve ever watched, everybody gets so excited about finishing the floor. Now we know why! It’s so wonderful, such a milestone! This went much smoother than our floor insulation and plywood, so it was a pleasant time for all! Check out our video and let us know if you have any questions! We’re onto wall insulation, ceiling insulation, and the bathroom! Stay tuned and make sure you subscribe so you can be notified when we post new videos!
For the Contour Gauge, use our Amazon Affiliate link and search ‘contour gauge’
What do you think is more important in a campervan…cabinets for storage or a bench to sit down on? What if you can have both? Well that is what we are trying to go towards. In this episode we install our cabinets because we need them installed before we install the remaining parts of the floor. We went with pre-made unfinished cabinets from Lowes because we don’t have the time or expertise to make our own. We were debating on doing one side cabinets and the other a bench, but we opted to utilize our storage and decided on both sides cabinets. We painted them and cut them to shape around the wheel wells. We were very happy with how they turned out! Thanks for watching.
Steps…that’s how you get to the end of a finish line. In this step we tackled the installation of the plywood sub-floor. This project was rather uneventful, but required close attention to the cutting. We probably did way more work than was needed with all the stencils, but we’d rather do that than buy tons of extra plywood to redo any mistakes. We purchased 3 sheets and the all worked out just fine, didn’t even have to knock on wood! 😉 We are sooooo happy to be done with this part of the floor, it’s so nice to be able to walk around on it now! We hope you enjoy this video!
We never thought it would take this long to insulate a floor, but we’d rather take the time now and have it last much longer and be as good as it can be! This insulation process was time consuming and educational! We hope you enjoy the video and hopefully we can be of some insight for those of you who are debating the van conversion process. It feels good to be done with the seats and floor insulation and moving on to the next item on our to-do list! Thanks for those who hung in there awaiting our newest van build videos, we appreciate your patience as we took some time to say goodbye to some family and friends! Back to the van build we go!
Here’s our video from the day Alan went to purchase and pick up our new-to-us van! We were so very excited to see it for the first time! We were very lucky in finding a unicorn of a Promaster all the way in Connecticut. This was a rare find because it is an empty cargo van (with 2k miles and hardly used). Most cargo vans have high mileage and have been put through the ringer. It’s also rare, because most cargo vans do not have windows because they’re used for deliveries. This one has windows, much like passenger vans. We jumped at this purchase when we saw it and are happy we did!